Connections suitable with flanges UNI EN 1092-1 PN 10 – 16
Standard API 594
Face to face length: EN 558-1 serie 16, API 609 BS 3135
Installation: horizontal / vertical with down-up flow direction. In horizontal position, the axis must be placed in vertical position. In vertical position, the plates must be opened in the same flow direction. Downstream, a piping of minimum length 5 times diameter, to be installed before the valve, and a pipe of minimum length 2 times diameter after the valve, to allow stabilization of flow and recovery. Installation between counterflanges.
APPLICATIONS ° Water supply ° Heating – conditioning systems ° Pumping stations ° Waste water treatment plants ° Irrigation
– Fig 805: GG/GGG/NBR
– Fig 805I: GG/316/NBR
– Fig 805C: GG/Al Bz / NBR
Epoxy paiting suitable for drinking water applications.
The dual plate check valves wafer type are a compact kind of check valve. With a small face to face length and being wafer type, these dual plate check valves can be mounted directly between flanges and in accordance to many standard connections. The body is made in one piece only, in cast iron with disc in ductile iron, stainless steel or Al-bronze and spring in stainless steel, these parameters allow the dual plate check valves to be applied for several applications. The automatic mechanism of plate opening grants low water losses, and the spring avoids fluid hammer effect. Epoxy coated inside and outside, these check valves are suitable for potable water.
|body||cast iron GG25, EN-GJL-250|
|spring||stainless steel 316|
|disc||ductile iron GGG40 / st.st. 316 / Al Bz|
|body seats||NBR – EPDM|
|DN||H mm.||D mm.||Weight kg.|
|DN||Nominal pressure||Test pressure Mpa||Max working pressure Mpa|